- AVIONS
- DRONES
- HELICOS
- PLANEURS
- BATTERIES
- CARBURANTS
- ÉLECTRONIQUES
- MOTEURS
- RADIOS
- ACCES..
-
Banner
-
Banner
Description
Custom made motor for LOGO 600 / LOGO 600SX
- for 10S Lipo with pinion 11/12 teeth modul 1
- two different motor mount positions possible: 4x25 / 4x30
- Motorshaft: 6mm x 32mm
- Weight: 460 gr.
Specifications
| Stator Diameter | 40 mm (1.57 in) |
| Stator Thickness | 35 mm (1.024 in) |
| No. of Stator Arms | 12 |
| Magnet Poles | 10 |
| Motor Wind | 10 Turn Delta |
| Motor Wire | 26 - Strand 0.25mm |
| Motor Kv | 450KV RPM / Volt |
| No-Load Current (IO) | 1.85 Amps @ 10v |
| Motor Resistance (RM) | 0.020 Ohms |
| Max Continuous Current | 75 Amps |
| Max Continuous Power | 3300 Watts |
| Weight | 460 Grams (16.22 oz) |
| Outside Diameter | 49.98 mm (1.97 in) |
| Shaft Diameter | 5.98 mm (0.235 in) |
| Body Length | 61.8 mm (2.43 in) |
| Overall Shaft Length | 100.0 mm (3.93 in) |
| Max Lipo Cell | 12s |
| Peak Current | 95A (5 seconds) |
| Peak Power | 4200 Watts (5 seconds) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |