

Banner
Banner
Weight (Without Connectors) | 216 g (7.62 oz) |
Max Continuous Current | 120 Amps |
Peak Current | 135 Amps/1s |
Operating Voltage Range | 14-59 Volts |
BEC Output voltage: | 5.5V to 8.2V adjustable. |
Max Continuous BEC Output | 10 Amps @ 8.2 V |
Peak BEC Output | 15 Amps/1s @ 8.2 V |
On Resistance | 0.67 mOhms |
Size | 93 x 53 x 28 mm (3.66 x 2.08 x 1.10 in) |
610g
Low Voltage Cut-off (14V to 48V at 1.0V increments) no need to select battery type just set the voltage the ESC should work on, by doing this, the ESC will be compatible with any future type of battery designs.
LVC= LOW VOLTAGE CUT : 140(14V) TO 480(48V).
BRK= BRAKE SETTING: 1: NO BRAKE, * 2: VERY SOFT BRAKE, 3: SOFT BRAKE, 4: HARD BRAKE, 5: VERY HARD BRAKE
AIR= 1: Activate Airplane mode, 2: External Governor mode
PCT= PROGRAM CUT TYPE (LVC TYPE): 1: CUT 50%*, 2: NO CUT JUST LED WARNING, 3: PULSE WARNING
MAT= MOTOR ACCELERATION TIME DELAY: 1: 0.15 Seconds* (recommend for AIR 2), 2: 0.3 Seconds, 3: 0.45 Seconds, 4: 0.7 Seconds, 5: 1.3 Seconds
CAR/B= DISABLED
COP= CURRENT OVERLOAD PROTECTION: 1: SENSITIVE*, 2: NORMAL, 3: INSENSITIVE
FREQ= DRIVE FREQUENCY: 1: 8 kHz *
SS= 1: SOFT START WITH OUT GOVERNOR MODE*, 2: SOFT START WITH GOVERNOR
TIM= MOTOR TIMING: 1: AUTO TIMING*, 2: 5 Degrees (Recommend for GOV 1), 3: 15 Degrees, 4: 20 Degrees, 5: 25 Degrees, 6: 30 Degrees
P Gain = POWER GAIN: 1 to 11 (SOFT to HARD), DEFAULT: 5*
I Gain = INTEGRAL GAIN: 1 to 8 (INSENSITIVE to SENSITIVE), DEFAULT: 5*
* = BEC VOLTAGE: 1: 5.4v*, 2: 6.2v, 3: 7.4v
ESC120SBEC